Globalization - Good or Bad Essay Example | Topics and Well Written Essays - 1000 words - 1

Globalization - Good or Bad - Essay Example In terms of International Trade, the author has described globalization as the platform that sets a level playground for both rich and poor countries. The author has also affirmed the less developed country can only improve their situation through the assistance of World Bank and the International Monetary Fund. I agree to a greater extent the assertions of the author except at some few issues which I total disagree. The World Bank and the International Monetary Fund have been described by the author as the pillars of global governance systems. The author overlooked the power of sovereignty of states, democracy, and the international justice system. The claim that developing countries can only improve their situation through these two global financial institutions is not accurate. Wallerstein (2004) pointed out that the World Bank and the International Monetary Fund is ‘training’ poor countries to depend on them. Developing countries have difficulties servicing the loans they receive from these organizations. They find themselves overburdened by the huge interest rates and end up borrowing again from other sources including internal sources. This creates a scenario similar to the one of digging a hole to bury another hole. The problem still remains. In this regard, I view the two institutions as contributing to the slow growth of developing economies and not as the sole path to their economic prosperity. Multinational companies in developing countries have been highlighted as better paying compared to the local firms and that foreign firms are not really oppressing their workers. Hurst (2008) claim that multinational companies are one of the social oppressions in less developed and poor countries. They offer jobs to locals at a higher wage than local firms, but this should not justify the poor, working conditions, job insecurity, or the prolonged hours of work often witnessed especially in the manufacturing industry. The author claims that if the w orkers were not happy with these companies then they would leave. Hurst (2008) explains that is huge labor force in developing countries and very few job opportunities which leaves many workers to ‘persevere’ where they are. The reason, therefore, why these workers continue working for the foreign firms is not because they are happy but rather because they have nowhere else to look for a livelihood. On the issue of foreign companies being nothing compared to the government, and not being able to raise an army or taxes, the author failed to put into perspective that, at times, some senior government officials usually have personal interests in these companies. Revesz (1997) stated that when it comes to crisis where multinational firms are being accused of various reasons, ‘the states cannot be trusted’ in the way the matter is handled. He observed that despite huge negative publicity and accusations from both the media and the public, the government remains silent and waits for the ‘tide to settle’. The international trading system has been implied by the author as unbiased against developing countries. This may be true as far as international trade laws and regulations are concerned. But, on the other hand, according to Wallerstein (2004), there is a more serious issue of trade imbalance whereby developed countries have an upper hand due to their economic strength advantage, superior

Male circumcision as an hiv control stategies and not a natural condom Essay

Male circumcision as an hiv control stategies and not a natural condom - Essay Example Reproductive Health Matters, the safest way to prevent HIV infections is still to use a condom rather than relying on assumptions which are yet to be proven sufficiently (Bonner, 2001). Bonner is of the opinion that unless certain facts are not proven practically, it is unwise to adopt and follow such assumptions. The facts to be proven encompass umpteenth number of issues such as the reason and the way how circumcision is risk-free, the exact relationship between circumcision status and the remaining STIs (Sexually Transmitted Infections). Also, Bonner is still waiting for an answer backed by sufficient evidence that whether or not positive result found in high-risk populations will reap equal results in case of other general groups. However, according to Updegrove, various conclusions insist that uncircumcised males tend to suffer from higher rates of sexually transmitted diseases (Updegrove, 2001). The same has been coherently acknowledged by Ronald Gray and his team with similar mindset (Gray, Kigozi & Serwadda, et al, 2007). Other think-tanks, Bailey, Plummer and Moses, all consider circumcision as an anti-HIV measure (Bailey, Plummer & Moses, 2001). Newell and Barnighausen have gone on to confirm that male circumcision cuts down HIV risk even in the general population (Newell & Barnighausen, 2007). Nevertheless, it should be noted that all the above think-tanks do reveal a certain level of uncertainty in expressing their perspectives. Hence, the two completely distinct recommendations; whether or not to replace condoms with circumcision appear to be a highly perplexing issue. Bonner highlights an investigation according to which circumcised men reveal higher occurrence of genital discharge (Bonner, 2001). He puts forward a French report which reveals that both circumcised as well as uncircumcised men exhibit almost same state of HPV incidence which plays a vital role in cervical cancer (Bonner, 2001). By referencing an American case, Bonner diligently

Research proposal Example | Topics and Well Written Essays - 1750 words

Research Proposal Example Gulf areas in general, and Saudi Arabia in particular, are oil rich regions with the economy being driven by the large oil producing organizations. The required financial support for the SMEs, in order to strengthen their capability to further contribute towards the progress of Saudi Arabia’s economy, is however somewhat lacking. This is despite the fact that SMEs have evidently exhibited great developmental potential. The current research aims to determine the role that SMEs play in the development of Saudi Arabia; as well as to identify any governmental and other business organizations’ support provided towards sustaining continued operations and growth of SMEs in the region. This paper be presented with a brief overview of studies and researches previously conducted on the subject through a literature review of SMEs, in general; the financial support of the government for SMEs in Saudi Arabia; and the role that SMEs play towards the development of the country. The ne xt section would focus on the research questions and methodology, which would identify the required method which would achieve responding to the main concerns identified within the discourse. Likewise, any limitation to the study would be presented; prior to delving into the ethical considerations, as required. Finally, the time scales which detail the tasks and time frames for the specific research portions would be detailed in the last section. 2.0 Literature Review There have been several studies conducted on the subject that aimed to determine the role of SMEs, in general; and SMEs within the Saudi Arabia region. Their definitions would be explored, including financial support and development role in the economy of Saudi Arabia. 2.1 Small and Medium Enterprises Though SMEs exist all over the world and in large numbers, there is still no concrete definition for SMEs due to various practical reasons. Fu (2011) suggested that defining SMEs differs from country to country and are ba sed upon different variables such as number of employees, revenue, nature of trade etc. (Fu, 2011). Normally, the number of employees for SMEs are defined at less than or equal to fifty for relatively small organizations whereas for medium organizations, the upper limit of number of employees is normally between 100 to 250 (Capitas, 2013). Thus, SMEs were clearly classified according to the number of employees, as well as the amount of sales revenues generated within a stipulated time frame. Within Saudi Arabia, various organizations define SMEs according to different criteria and are followed by different organizations. There are two important criteria used in defining SMEs within Saudi Arabia. One criteria followed by the SME Development Center is to have less than or equal to 20 employees for small organizations and 21-100 employees for medium organizations. However, Shalaby (2004) concentrated on suggesting that different criterion is being followed by Saudi Industrial Developme nt Fun, and it defines SMEs based upon the revenue criteria

The use of Computers at Somerfields Supermarket in Cheadle Essay Example for Free

The use of Computers at Somerfields Supermarket in Cheadle Essay Each store in the Somerfields chain uses a computer to keep track of transactions (purchases) throughout the day. The system uses real time processing so that at any time the manager of the store can check exactly how much stock there is in the shop. For example, when someone purchases something the item is passed over a bar code scanner, which records the items code number. This item is then immediately deducted from the stock held in a database. If real time processing was not used then the manager would not know how much stock he had in until the end of the day. Of course not all stock is sold. Sometimes items are damaged, or wasted (eg. they go past their sell date). In these cases the stock still needs to be deducted from the database but needs to be classified as waste so that a purchase is not recorded. Staff use a portable electronic wand to scan the bar codes of these items. The wand uses radio waves to send its data to the main computer. They also use these wands to do manual stock takes (this is used to verify that the stock held in the computer database is correct). Every night the stores main computer connects to the Somerfield main frame computer. The main frame is a very powerful computer which connects to every computer in each of the Somerfield supermarkets. This computer will check the stock in each store and then automatically order new stock if it is needed. It will also change prices of stock, update the store on special offers and what to do to promote the offers etc. Somerfield also use an Intranet to keep its staff informed about promotions, special deals, changes to policy etc. The supermarket chain uses EFTPOS (electronic funds transfer at point of sale) so that customers can use credit and debit cards. The store prefers this method of payment to cash because there is less need for security, and also most people today shop only with cards and dont use cash. The biggest problem with using all of these systems is user error e.g. not scanning all items on a stock take, forgetting to record wastage etc. Another difficulty is how to monitor short life materials or complex materials like meat (remember meat is cut before it is sold and is not always sold at the same weight). Loyalty card Some large shops such as supermarkets have introduced loyalty cards. Tesco was the first to start the ball rolling in 1995 with its Tesco Clubcard. Customers apply for a card giving their name, address, e-mail and various other personal details. In return, they are issued with a Loyalty card that resembles a credit card in size and appearance. The loyalty card contains the customer membership number. The card is swiped when the customer buys something and details of their purchases are stored on the computer system. The customer is usually rewarded with discounts or vouchers, typically 1p for every à ¯Ã‚ ¿Ã‚ ½1.00 spent. On first glance, this would only seem to benefit the customer as the entire scheme is free of charge. However, supermarkets also benefit in other ways. The loyalty card allows the supermarket to build up a very accurate picture of the owners purchasing habits. Say for example, a new gardening magazine has come on to the market and the store wants to let potential customers know about it. The loyalty card database can be used to identify customers who regularly buy other gardening magazines. A mailing list is generated and hopefully the new magazine finds many new customers. Another way the card can be used is to understand where customers come from in the local area, because the database contains names and addresses. If there appears to be a gap in the locality, then it helps work out if it is worth building a new store to cover that area. So you can see the supermarket also benefits from running the scheme. The use of ICT in supermarkets has brought about many benefits for the company. Some of them are listed below: There is much less chance of human error when performing calculations and handling money. Everything takes place much more quickly and efficiently. The price of an item can be altered at any time simply by entering the new price against its barcode on the computer database. There is no need to price goods individually so some staffing costs are reduced. Less paperwork needs to be stored and information can be retrieved more easily. Better stock control means that the manager knows which products are selling well and those that are doing poorly. The computer system will automatically re-order new stock just in time to prevent the shop selling out. This means that fresher goods are always on display and reduces the amount of money tied up in stock. On the right you can see a photograph of the stores computer system. Note the use of two mini computers for back up. If one fails the other automatically takes over. On the bottom left you can see the back-up power supplies for use in the event of a power failure. The cabinet to the right houses a modem, connecting the store s computer to the head office computer via telephone lines. The centre units are bar code label printers.

Product and Process Evaluation of Huxley 3D Printer

Product and Process Evaluation of Huxley 3D Printer Product development for quality Ademola Adewoye Quality engineering, product and process evaluation Huxley 3D Printer Quality Gurus’; coursework Abstrat This article refers to a coursework of product development for quality to which answers are provided for questions as related to product development for quality coursework1. This report is dived into two: part A consists of question and answers for Huxley 3D printer and part B comprising quality gurus’ analyses. Aims To extend the masters’ student’s ability to apply design methodology and assessment techniques associated with quality engineering in broad context of managing the engineering and design process. Objectives The core objectives employed include the following. Teaming to assemble 3D Huxley printer Understanding and evaluating the design defect with comparative analyses Understanding quality, quality development, and quality design fundamentals. exploring the quality gurus philosophers Learning about quality operation and management Scope of the study This article is limited to answers to product development for quality coursework and evaluation of quality gurus; titled quality engineering, product and process evaluation. Significant of the study In context of technical skills, I had learnt new technical skills e.g. assemblage of disassemble machine as one worked upon; the 3D Huxley printer. I also worked with external experienced students in modelling and printing of different parts. The experience and knowledge gained is never quantified hence this study is significant to helping students developing a practical technical skills. Chapter one Part A 1.0 brief introduction A Huxley 3D printer is a robust three dimensional rapid prototyping machine developed by Erik Debruijn and other and named after a biologist Thomas henry Huxley. It is a mechatronic machine consisting of mechanical components such as timing belt, nuts, bolts, bearings, extruder, x, y and z axis frames and electrical component such as electric motor, microprocessor, and converter. This machine is controlled by a firmware and a host software configured to convert a 3D design from any CAD related software into a physical design called rapid prototype printing. This 3D printer are flexible, fast, trendy and easy to use. Chapter two 2.0 Assemble the Huxley 3D printer using the supplier online instruction and once complete demonstrate the machine as a working systems. 2.0 Answer The 3D Huxley printed was assembled by my group and was functionally demonstrated. 3.0 Compare the following aspect of your completed machine with one completed another machine built by your peer groups. Report on what do you observe to be the factors affecting the following; Individual component quality System consistency when compared to other completed ‘Huxley 3D printers’ Ambiguity and opportunity for error in the instruction set 3.0 Answer The following observations were made in comparison with other peer groups in terms of quality. Coupling or assemblage accuracy and orientation are factors that affects the output of the printout in terms of quality as was observed during testing of peer A and peer B machine. One peer machine produce better surface finish than the other observed to be as a result of poor orientation of vertical and horizontal frame parts. The plastic frames were also observed not properly fillet with no allowance which bars performance and quality of printing. Electronic components such as the electric motor positioning was observed not labelled and diagrammatized. Generally, the individual components of the ‘Huxley 3D printer’ was affected by lack of surface finish and inaccurate labelling. The following observations were made in comparison with other peer in term of system consistency All the electric component e.g. electric motor provided the was observed consistent in both peers Major mechanical components such as bearings, x-y-z rods, axis-belt drive, pulley and shaft, provided by supplier was observed consistent. All major frame components Generally, the factors which affects systems consistency are labelling and specifications. Mechanical components parts such as nut were not threaded with precision; Part was observed to be excess. The following was observed a major factors responsible for systems ambiguity and opportunity for error in comparison with other peers. Too many component parts Part dimensional inaccuracy Poor labelling Too many axes Poor surface finish of parts. 4.0 Based on your observations suggest how the quality of the system as well the user experience could be improved. 4.0 Answers Based on my experience gained and observations made during the course of the study I suggest the following for system quality improvement. parts should be simplified to improve design optimisation Nozzle could be modified to lower dimension of 0.3mm or less for high quality surface finish Increase the number of extruder to differentiate support materials from printing material when printing or prototyping complex design. Improve the slice setting Increase speed Accurate parts labelling for easy and better assemblage. Frame rigidity could be supported by other methods of joining e.g. riveting to provide frame structure a solid rigidity. Post treatment (rework) of Huxley 3D printer parts could help to ensuring part are produced to standards e.g. uniform dimensions of frame rods, bolt and nuts. Thermoplastic mini-spool (printing material holder) should be inclusive in design parts to store sufficient amount of filament when the machine in operation. The x-carriage mounted fan should be designed in two parts for effective and speedy cooling of printing parts. An additional nuttraps in substitute of self-tapping screw with metal screw should be used for the carriage for better quality finish. In regards to user experience the expressions below are suggested; More practical sessions should be allocated to students offering this module to facilitate their real know-how technical skills of the subject matter. The assembly of the machine should be individual with group analyses, suggestion and assessment to ensure an independent knowledge transfer. Exhibition, seminar should be held and best student compensated to motivate students to go extra-ordinary. Part B Discus your personal experience for this project making specific reference to ethos captured by the terms; ‘zero defect’ as used by Philip Crosby ‘Fitness for purpose’ as used by Joe Juran ‘constant improvement’ as advocated by Bill Conway Answer The quality guru Philip Cosby defines quality with his four principles of quality management as follows; ‘quality is conformance to requirements, ‘defect prevention is preferable to quality inspection’, ‘quality is measured in monetary terms’ and ‘Zero Defect (ZD) as quality standard’ as main focus as concerned this article. The need of technological advancement and commercialization of 3D printing for all is observed a genuine requirement for 3D development but substandard finished parts, poor labelling and other defects observed during the machine assembly in the course of the practical study was as a results of a ‘no zero defect’. This factor of no zero defect with the Huxley 3D printer can be blamed on management. Perhaps, its worker are not motivated and recognised accordingly toward a personal interest in their job and or lacks production procedures where for every final parts produced requires an inspection to ensuring quality. The lack of ‘no zero defect’ was clearly observed in the bolts and nuts, frame rod, and thermoplastics frame parts. furthermore, since Huxley produces large volume of components part (mass production) they should adopt the principle of ‘zero defect’ primarily focusing on preventive methodology; zero defect’ of its worker towards a constant, cautious, and right attitude of work within its organization to ensuring quality at every level of production. This methodology if adopted will impact great benefits to the company’s general growth, brand recognition and improved their profit maximisation. The American-Romanian quality guru; Joseph Moses an advocator of quality and total quality management defines quality in term of fitness for purpose as ‘evaluation of how well a product perfumes’ for its intended use’. Since the primary function of the Huxley 3D printer is to print 3D designs preconceived from any computer aided design software (CAD) and as observed during the course of the study, it perform this function to satisfactory printing various component parts; simple and complex it can then be established that the fitness for purpose postulated by Joseph Moses is satisfied hence Huxley would need to fine-tune and improve on its current standards for quality with fitness of purpose because â€Å"without standard there is no logical basis for making a decision in taking actions† (Philip 2008) to provide its teaming customers with not just a 3D printing machine but one that can stand global competitive market in quality and functions. Although, it is assumed that Huxley already adopt this methodology in its production and quality management structures but it would do the company more benefit fine-tuning to achieving a more global qualitative product. William Bill Conway advocates for continuous improvement in product development for quality; a concept that put the American ford company into world breaking record in operational effectiveness. Huxley 3D printer was made an open source on the internet to serves as empowering tool for product improvement, the need to train and retrain its staff is another way a strategy to continuous improvement of product for quality. A company growth depends on the ability of its management strengths for a consistent improvement which further translate to efficiency and effectiveness in operations. It is conceived that Huxley Company applied this methodology via internet open source with continuous research as well. In this way, a substantial improvement on the component parts of the worked on Huxley 3D printer has been updated and new model are produced. With maintaining this methodology and exploring other related method constants product improvement can be sustained with enormous benefits. References Roberts, T. (2014): product development for quality EEB_7_877 [lecture note] quality gurus, Huxley 3D printer, LR-313, London South Bank University, 25th March, 2014. Available from http//:www.blackboard.ac.uk Wikipedia article (2014) online [accessed 28th 04, 2014] available from: http:// www.reprapro.com Google image (2014) online [accessed 30th, 2014] available from: http//www.google.com/image google article (2014) online [accessed 4th, 2014] available from: http//www.google.com

Omnipotence And St. Thomas Aquinas :: essays research papers

Omnipotence and St. Thomas Aquinas Omnipotence literally means the ability to do all things, or to have absolute power. This quality seems to be generally accepted as an intrinsic characteristic of the Judaeo-Christian god, as it says in Luke I. 37, "...there is nothing that God cannot do.". Certain objections can be raised to attributing this characteristic to god however, in-so-far as this characteristic seems to conflict with other accepted attributes of god. In The Summa Theologica St. Thomas Aquinas addresses some of these objections, the most telling of which can be restated as: (I) To sin is an action, however god is unable to sin. Therefore god cannot be omnipotent. (ii) The greatest act possible of god is his practice of "sparing and having mercy". There are actions judged to be much greater however, such as creating a world. Therefore god is not omnipotent. (iii) If god is omnipotent, then everything is possible and nothing is impossible. If this is true however, things which are necessary (things which cannot possibly not exist) are no longer so. This is impossible - therefore god cannot be omnipotent. Aquinas begins his rebuttals by defining what is encompassed by the characteristic of divine omnipotence. He explains that god is able to all things which are "possible absolutely", which he defines as all things which can be logically expressed without the predicate being in conflict with the subject - i.e. god is capable of all things which do not involve a contradiction in terms. This does not imply any defect in the power of god, Aquinas goes on to say, because impossible things by definition have "no aspect of possibility", moreover, it is absurd to expect divine omnipotence to encompass the logically impossible. (I) Aquinas answers the first objection as follows. He explains that "...to sin is to fall short of perfect action; hence to be able to sin is to be able to fall short in action..." which he attests is contrary to the meaning of divine omnipotence. (ii) In answering the second objection Aquinas points out, "It is not

Outline the key principles of Neoliberalism and its actual and prospective contribution to wealth and welfare in developing societies

Outline the key principles of Neoliberalism and its actual and prospective contribution to wealth and welfare in developing societies. Counter-revolution was seen as a new vision of growth when it first comes out. In the mid 80s, the development if counter revolution was supported by the Western media and government aid agencies, also by some very influential international organisation, e. g. the World Bank Counter revolutionaries see themselves a better interpretation than the development economics. The development economy identify the problem of the developing countries in various way, it imply dual economics, labour surplus, low level equilibrium trap, unbalance growth, vicious cycle of poverty, big push industrialisation, foreign exchange bottlenecks and unequal exchange rate. However, counter revolutionaries claim the orthodox economics was unrealistic because of it assumption on people behaviour and technology implication in the industry. Also, it's said to be irrelevant, since it's main concern is with the allocative efficiency of given resources. These weakness means the development economics cannot address the problem of the growth aspect, neither it could deal with the problems of poverty and the distribution of income. Some counter revolutionaries believe that, the 3rd world exists only as a kind of collective psychological delusion. It's important to see how the counter revolutionaries interpret their view to the 3rd world to understand its policy concept. And their views on 3rd world derive from its continuing political engagement with the struggle against socialism. They also stress that the 3rd world had a kind of 3rd worldism, which contains an anti-west attitude. They seen the west as exploiters who exploits the benefits from the already poor 3rd world, and in some cases, they are right, and these attitude and facts alleged crypto socialist policies of 3rd world government. Counter-revolution was an abrasive now approach. When looking at the policy of the counter-revolution, we ought to see how it views the 3rd world problem, and what solutions do can the counter-revolution offers. According to the counter revolutionaries, the main problem of the 3dr world countries is their over-extended public sector, which cause the problems limitation through government intervention and central planning. For an economics to be efficient, there needs to be the existence of the market and incentives. However, they are being filters through government policies and agencies. Also, counter revolutionaries seen physical investment is only one of the determinants for the growth in the development. Human development such as education and building of infrastructure are as important as physical investment, and it should not be place as a less important government objective than physical investment. The economics policies of government and the distortion they induce re now the major focus of the analysis of the development policy. The clear induction we can see here is that, unnecessary government intervention will endanger the benefits of the market, and the relatively unimportance of human development policy, which will hinder the process of development. These are the main components of the counter-revolution's new vision of growth. Why would be the public sector being the problem? We can see from an example. If there's a public electricity corporation which is making a loss, the government decide to make up the loss by subsidise it using the tax revenue, the end result will be little incentives for the management to minimise cost. Cost minimisation is essential for n efficient market and the process of cost minimising is difficult and time consuming, and it's unlikely to take place without some pressure or incentives. If the government removes that pressure, public enterprise tends to become complacent and high cost. As a monopoly, the public sector is said to be fail to respond adequately to consumers preferences by insulate itself from the consumer demand. Also, many 3rd leaders may wish to strengthen their political power by influencing the economic performance, thus the country's development prospect. This means that when an economic decision was made, it's on the benefit for the politicians, not to the economy. And these are the factor causes other problem in the 3rd world countries, such as problem on foreign trade and industry, distortion of key prices (e. g. exchange rate) in the economy, which in turns causes balance of payment problems. The other main issue arise for counter revolutionaries are the practice for trade and aid policy. There are a few anomalies highlighted by counter-revolution. Some counter revolutionaries' claims that official aid has a regressive impact on world income distribution. It's theoretically possible according to Bauer, ‘many tax payer in the donor cities are far poorer then many people in the 3rd world countries where, moreover, aid often benefits the prosperous rather than the needy. ‘ Sometime, the aid is aimed to relief poverty in the recipient country, but the recipient country may resist it since they feel such attempts infringe its sovereignty. E. g. , local farmers will suffer income lost if food aid was given to people free of charge, no one will spend money on the domestic food products. Thus, the donor's citizens could have been taxed for the benefits of an unfriendly state. These are the major anomalies concern the counter revolutionaries on the ground of aid giving. Also, when aid is given to a 3rd world country which already had a over extended public sector, the government will tends to use the aid to support that public sector, which they can still claims that the aid had been used on the development of the economy. In this case, aid has help to boom the unproductive public sector beyond what it would have been in the absence of aid. The counter-revolution views conclude that, aid should therefore be given to the private sector. One of the anomalies emphasized by the counter-revolution is that the giving of aid merely relief poverty in the 3rd world, it might even worsening it. In the opinion of the counter revolutionaries, aid should be abolished. However, for political reason, this is very unlikely will be the case. So counter revolutionaries advocates that, aid should be reduce in size, also, it should be use as reward for policy reforms. Policy reforms which shows development of the economy as well as living standard of the people and the moving towards socialism. The counter revolutionaries also have its view on trade. Counter-revolution has always opposed controls over foreign trade. At international level, the counter-revolution's opposition to ‘ management trade' has been expressed through its critics to the International Commodity Agreements (ICA). ICAs are internationally negotiated schemes of intervention in the markets for exports of primary products. Counter revolutionaries oppose ICA because of its failure to alleviate the poverty in the 3rd world countries. Little suggests that ‘ The increase political management of trade is unlikely to help the poor or the poorest states'. Counter revolutionaries suggest that the 3rd world countries are minimally involved with production for export because they tends to be remote, isolated and lacking the skills to forge the effective links with their surrounding society. However, in the reality, the arguments of the counter- revolutionaries do not entirely hold up. About the point of 3rd world countries lack of share in export, we can actually see that, in 1982, one third of the 3rd world countries had export that accounted for 20% or more of third domestic product. Further more, on average, 60% of the export of the 3rd world countries was of fuels, minerals or other primary commodities. And for the counter- revolutionaries' negative opinion on aids, in the case of India, Bangladesh and South Korea, aid merely creates what the counter- revolutionaries sees as dirigiste syndrome. When counter- revolution is implemented across Africa, it had failed in nearly all situations, per capita income down 10% over the period. They were not prepared for high-level market openness. In Philippines and Sri Lanka, there were mix results, but certainly not successful, causing economic growth fell, increase in poverty and unemployment. The most successful case of the counter-revolution policy is in South Korea, where it achieve falling inflation rate, GNP growth and income distribution improved, current account deficit narrowed and social welfare improved. But the success can be achieve only because they were not only looking at the macroeconomic in nature, but also consider social welfare. The unhelpfulness of the counter- revolution comes from its particularly strong preconception of the actions that need to be taken to promote development. That preconception is that development problems are problems of resources allocation. It has also been attacked for its simplistic accounts of the nature of ‘real' markets in many developing countries and for their one – dimensional accounts of what motivates apparently isolated economic actors. Some policies and theories do have some merits, but they need to be accompanying by other policy to make it effective.